PU 75
« Zur Übersicht
Description
ZETTEX PU 75 is a one-component, high viscosity, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. Completely solvent free it is odorless and also nonconductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment. Highly resistant to UV irradiation, weathering and ageing.
Chemical nature
Polyurethane
Advantages
• One-component polyurethane
• Suitable for cold application
• High viscosity – high initial tack and non-sag properties
• Short cut-off string
• Suitable for use with integral aerials.
• Prevents contact corrosion in aluminium-body vehicles.
• High UV resistance and colour stability
ZETTEX PU 75 is a one-component, high viscosity, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. Completely solvent free it is odorless and also nonconductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment. Highly resistant to UV irradiation, weathering and ageing.
Chemical nature
Polyurethane
Advantages
• One-component polyurethane
• Suitable for cold application
• High viscosity – high initial tack and non-sag properties
• Short cut-off string
• Suitable for use with integral aerials.
• Prevents contact corrosion in aluminium-body vehicles.
• High UV resistance and colour stability
Packaging
• Cartridge 310ml
• Cartridge 310ml
Application
•ZETTEX PU 75 is specifically addressed to the glass replacing and installation of front, side and rear windshields in the sector of Bus, Truck, Railway and industrial vehicles. Thanks to its high viscosity it guarantee a very high initial tack and is suitable for the application of
large surfaces glasses typical in the BTR. Suitable for elastic structural bonding (assembly of various materials which are subjected to high thermal and dynamic stress) in the transportation Industry. The product is also characterized by a very good UV resistance and color stability making the product ideal for the sealing of exposed joints, including joints between lateral glasses. This once cured it provide an excellent semi-matt appearance for aesthetical purposes.
• The surfaces to be treated should be perfectly clean, dry and free from dust and grease. It is
necessary to apply a Cleaner/Activator and a Primer on glass. The adhesion on normal
vehicle varnishes generally does not require the use of Primer. It is advisable to carry out
preliminary adhesion tests on the support. Specific guidance regarding the use of Primers
may be obtained by submitting substrate samples to our Laboratories.
•ZETTEX PU 75 is specifically addressed to the glass replacing and installation of front, side and rear windshields in the sector of Bus, Truck, Railway and industrial vehicles. Thanks to its high viscosity it guarantee a very high initial tack and is suitable for the application of
large surfaces glasses typical in the BTR. Suitable for elastic structural bonding (assembly of various materials which are subjected to high thermal and dynamic stress) in the transportation Industry. The product is also characterized by a very good UV resistance and color stability making the product ideal for the sealing of exposed joints, including joints between lateral glasses. This once cured it provide an excellent semi-matt appearance for aesthetical purposes.
• The surfaces to be treated should be perfectly clean, dry and free from dust and grease. It is
necessary to apply a Cleaner/Activator and a Primer on glass. The adhesion on normal
vehicle varnishes generally does not require the use of Primer. It is advisable to carry out
preliminary adhesion tests on the support. Specific guidance regarding the use of Primers
may be obtained by submitting substrate samples to our Laboratories.
| Eigenschaft | Spezifikation |
|---|---|
| Chemical nature | Polyurethane |
| Curing Mechanism | Moisture-curing |
| Colour | Black |
| Density [g/cc] | 1,28 ± 0,02 |
| Curing through volume [mm] (1 day 23°C and | |
| 50% r.h.) | > 3 |
| Tack-free time [min] (23°C and 50% r.h.) | 35 ± 5 |
| Shore A hardness [N/mm2] | 60 ± 5 |
| Elastic modulus at 100% [N/mm2 ] (ISO 37 DIN 52455) | ≥ 2,5 |
| Tensile strength [N/mm2] (ISO 37 DIN 53504) | ≥ 10,0 |
| Elongation [%] (ISO 37 DIN 53504) | ≥ 600 |
| Electrical volume resistivity [Ω·cm] | 1 x 106 |
| Application temperature [°C] | from +5℃ to +40℃ |
| Temperature Resistance [°C] | -40°/+100°, with brief points at +120° |