Stonefix
« Back to overview
Description
Zettex Stonefix is a one component PU adhesive for
bonding blocks and stones. Zettex Stonefix is very economical in use. Using the
Zettex Foamgun is necessary for the application. Zettex Stonefix creates a
strong bond within 30 minutes and is certified according to the most strict
building standards.
Material
Polyurethane
Advantages
• Immediately ready for use
• Much faster, cleaner and cheaper
• Up to 12m2 wall surface
• Better insulation by creating
airtight joints
• No need for water (mixing)
• No need for electricity (mixing)
• Stronger than traditional mortar
• Can be used for any type of stone
• Water resistant
• Excellent thermal insulation
• Better insulation by creating airtight joints
• Non flammable
Available forms
• 500 ml HH Aerosol
• 750 ml NBS Aerosol
• 500 ml HH Aerosol
• 750 ml NBS Aerosol
Application instructions
• Used for the fast gluing of building block on non-supporting interior walls. Zettex Stonefix can also be used for the gluing of, for example, wooden paling in a garden. Zettex Stonefix can also be used outside for gluing different elements.
1. Hold the stone adhesive in an upward position, remove the cap from the adapter and screw the spray can on the Zettex Foamgun.
2. Make sure that the Foamgun is not pointing at other people while the spray can is being screwed on.
3. After fastening the Zettex Stonefix can it must be shaken at least twenty times before it can be used.
4. The surface must be moistened because Stonefix cures better and faster on surfaces moistened beforehand.
5. In cold weather conditions the Stonefix must be heated in a warm room or with warm water. The temperature may not exceed 30 degrees!
6. Join the stone surfaces immediately after the Stonefix has been applied.
7. Any non-cured foam can be removed with Zettex Foamcleaner. Hands can be cleaned with the Zettex Cleaning Wipes
• Used for the fast gluing of building block on non-supporting interior walls. Zettex Stonefix can also be used for the gluing of, for example, wooden paling in a garden. Zettex Stonefix can also be used outside for gluing different elements.
1. Hold the stone adhesive in an upward position, remove the cap from the adapter and screw the spray can on the Zettex Foamgun.
2. Make sure that the Foamgun is not pointing at other people while the spray can is being screwed on.
3. After fastening the Zettex Stonefix can it must be shaken at least twenty times before it can be used.
4. The surface must be moistened because Stonefix cures better and faster on surfaces moistened beforehand.
5. In cold weather conditions the Stonefix must be heated in a warm room or with warm water. The temperature may not exceed 30 degrees!
6. Join the stone surfaces immediately after the Stonefix has been applied.
7. Any non-cured foam can be removed with Zettex Foamcleaner. Hands can be cleaned with the Zettex Cleaning Wipes
| Features | Specification |
|---|---|
| Touch dry time | 8-15 mins. |
| Fully cured | 2 hours |
| Fire class of hardened foam | B2 |
| Flash point of hardened foam | 600 ℃ |
| Flammable | NO |
| Temperature resistance of hardened foam | Long term: -40 to +90 degrees |
| Short term: -40 to +110 degrees | |