Spraybond X20 Misty
« Back to overview
Product description
Zettex Spraybond X20 Misty is an extremely quick-drying
universal misting adhesive suitable for most materials in
construction and industry.
Material
SBR rubber
Advantages
• Extremely Fast-drying
• Extremely powerful
• Mist spray
• For universal use
• Ready to use
Zettex Spraybond X20 Misty is an extremely quick-drying
universal misting adhesive suitable for most materials in
construction and industry.
Material
SBR rubber
Advantages
• Extremely Fast-drying
• Extremely powerful
• Mist spray
• For universal use
• Ready to use
• DCM free
• Barely penetrates porous materials
• Barely penetrates porous materials
Available form
• Spray can 500 ml.
• Spray can 500 ml.
Uses
• For the adhesion and fastening of paper, wood, cork, decorative film, foil and textile materials,
insulation, EPS, HPL, SKY and all kinds of leather or rubber.
Application
• Dry the materials to be adhered and remove dust and grease. Then carefully spray the contact adhesive
on both surfaces to be adhered. A distance between surface and spray gun of 30 cm is ideal.
Preferably apply the adhesive in rows without duplication. After 2-4 minutes adhere both surfaces to each other
and firmly press or roll. With duplication at least double the open time. With very porous surfaces carefully check whether there is sufficient contact between both adhesive layers. Apply an extra layer if this is required.
• For the adhesion and fastening of paper, wood, cork, decorative film, foil and textile materials,
insulation, EPS, HPL, SKY and all kinds of leather or rubber.
Application
• Dry the materials to be adhered and remove dust and grease. Then carefully spray the contact adhesive
on both surfaces to be adhered. A distance between surface and spray gun of 30 cm is ideal.
Preferably apply the adhesive in rows without duplication. After 2-4 minutes adhere both surfaces to each other
and firmly press or roll. With duplication at least double the open time. With very porous surfaces carefully check whether there is sufficient contact between both adhesive layers. Apply an extra layer if this is required.
| Features | Specification |
|---|---|
| Processing temperature | +5 to +40 degrees |
| Temperature resistance | -40°C to +100°C |
| Consumption | 70-80 gram/m2 |
| Open time | 3-4 min |
| Maximum yield | 6 m2 |
| Solids | 45 % |
| Color | Amber |
| Spray pattern | Mist |
| VOC | 544 g/l |