Description
Zettex Elastic Foam B2 is a permanently elastic foam that has been specially developed to absorb movements of surfaces and joints. As a result, the excellent sound and heat-insulating properties between components, such as the joints of window frames, are retained for a long time. Thanks to the unique formulation, the product can be used at temperatures down to -10 ° C. The development and production of this product meet the strict requirements of the ISO 9001 / EN 29001 quality standards.

Material
Single-component elastic polyurethane foam. CFC-, HCFC- and HFC-free (ozone-friendly and does not contribute to the greenhouse effect).

Advantages
• High degree of elasticity
• Constant compensation of movement of parts
• Thermal conductivity: 0.035 W/(m·K)
• Excellent noise insulation values RS,w:
• Seam width 10 mm: 63 dB
• Seam width 20 mm: 64 dB
• Optimal results at low temperatures to -10°C
• Powerful adhesion
• Building material class B2 in conformity with DIN 4102-1
• Building material class E in conformity with EN 13501-1
• High insulation value
• MTV value 37%
• Can be used on any surface
• Finished with plaster
• Can be painted over 

Available form
Spray can 750 ml

Colour
White

Areas of application:
• Installation of window frames (clean, checked behind filling, with the joints of window frames and external roller-shutters insulated and sealed.)
• Filling joints in outside door frames, but not for the primary installation without other mechanical fastenings.
• The filling of cavity walls, passages for electricity, gas and water supply lines and other openings.

Application instructions
Elastic Foam B2 can be fixed on the Zettex Foamgun. This enables optimal Elastic Foam B2 spraying. Shake the can thoroughly 20 times before use. This ensures optimal adhesion of the Elastic Foam B2. After spraying the Zettex Foamgun can be cleaned with Zettex Foamcleaner and hands can be cleaned with Zettex Cleaning Wipes. 

Features	Specification
Base	Polyurethane
Propellant	Without CFC, HCFC and HFC
Processing temperature	-10ºC to +35 ºC optimal: +15 ºC to +20 ºC
Density cured foam	13 – 15 kg/m³
Skin formation time	7 – 11 min. (+20 ºC, 50%)
Time before cutting (20 mm rul)	10 – 14 min. (+20 ºC, 50%)
Fully loadable (20 mm rul)	24 hours. (+20 ºC, 50%)
Temperature resistance	‐40ºC/+90 ºC
Temperature resistance short time	‐40ºC/+130 ºC
Ambient processing temperature	-10ºC to +35 ºC
Fire class	according to DIN4102‐part 1 B3
Degree of filling in joint	50% ‐ 60%
Deformation (MTV Value)	37%
Building material class In conformity with DIN 4102, part 1/EN 13501	B2/E
Cell structure	Fine
Yield (released product)	Approx. 40 litres
Shelf life	15 months after filling date. When stored upright and dry in unopened, original packaging. Store at a temperature between +5 °C and +25 °C in the shade.